docs: update home

home.md

@@ -2,53 +2,12 @@
 title: The FOSC
 description: All we have
 published: true
-date: 2019-04-23T01:10:47.300Z
+date: 2019-05-03T22:56:22.139Z
 tags: 
 ---
 
-# Basic overview
-
-- Entrypoint to network is a Linksys WRT1200AC
-
-- Main HP DL380 G6 server
-
-- File server is a Custom Intel SC5000 BASE
-
-# Router
-
-Self assigned WAN IP address, easily probed via our true domain `fosc.etsit.upct.es`
-
-# Main Server
-
-Its hostname is just `fosc`
-
-Runs NixOS with some nice configs and acts as a docker server.
-These configs are not intended to be touched by mortals, but can be seen by everyone so they can help in home setups.
-
-Extensive docker-compose setup available at `/var/docker/`. 
-TL;DR: Go there if you have been given access to deploy a stack.
-
-## RAID setup
-NixOS boots from an independent f2fs 250GB SSD. Real storage is available in a ZFS "RAID10" composed of the 4 mechanical disks. Due to RAID card annoyances, replacing a disk requires a reboot (and probably more intervention)
-  
-## Traefik
-This server is the services entrypoint for the network and hogs port 80 and 443 (among others) and will fetch different webpages based on domain.
-
-## Mounting
-Files are retrieved from the file server at `/mnt/gordo`
-  
-
-# File Server
-
-As you would have expected, `gordo`
-
-Also runs NixOS, acts as NFS server and torrent seedbox. Has a minor traefik+docker setup as well, doing not much.
-
-It is basically out of ram 100% of the time, as it is used for ZFS caching.
-
-## RAID setup
-Three 1TB SATA disks in raidz (RAID5). The first disk seen by the BIOS contains the GRUB bootloader and a small boot partition aside from one of the three ZFS partitions.
-
-Only one disk can fail at the same time. Be careful out there.
+Welcome!
 
+We made sure all the content is available via the sidebar
 
+The landing page will be expanded as an index when more content is available.

infrastructure.md

@@ -0,0 +1,54 @@
+---
+title: Infrastructure
+description: The hardware and software powering it all
+published: true
+date: 2019-05-03T22:54:18.630Z
+tags: 
+---
+
+# Basic overview
+
+- Entrypoint to network is a Linksys WRT1200AC
+
+- Main HP DL380 G6 server
+
+- File server is a Custom Intel SC5000 BASE
+
+# Router
+
+Self assigned WAN IP address, easily probed via our true domain `fosc.etsit.upct.es`
+
+# Main Server
+
+Its hostname is just `fosc`
+
+Runs NixOS with some nice configs and acts as a docker server.
+These configs are not intended to be touched by mortals, but can be seen by everyone so they can help in home setups.
+
+Extensive docker-compose setup available at `/var/docker/`. 
+TL;DR: Go there if you have been given access to deploy a stack.
+
+## RAID setup
+NixOS boots from an independent f2fs 250GB SSD. Real storage is available in a ZFS "RAID10" composed of the 4 mechanical disks. Due to RAID card annoyances, replacing a disk requires a reboot (and probably more intervention)
+  
+## Traefik
+This server is the services entrypoint for the network and hogs port 80 and 443 (among others) and will fetch different webpages based on domain.
+
+## Mounting
+Files are retrieved from the file server at `/mnt/gordo`
+  
+
+# File Server
+
+As you would have expected, `gordo`
+
+Also runs NixOS, acts as NFS server and torrent seedbox. Has a minor traefik+docker setup as well, doing not much.
+
+It is basically out of ram 100% of the time, as it is used for ZFS caching.
+
+## RAID setup
+Three 1TB SATA disks in raidz (RAID5). The first disk seen by the BIOS contains the GRUB bootloader and a small boot partition aside from one of the three ZFS partitions.
+
+Only one disk can fail at the same time. Be careful out there.
+
+